Blue Revive provides non-ferrous metal recycling for Alpharetta contractors, facility teams, and building owners, covering copper, aluminum, brass, stainless, insulated wire and cable, and electrical scrap. Material is graded and weighed, and settlement is index-linked and grade dependent, with weight and grade records provided. Projects range from a tenant build-out to an electrical or HVAC replacement. Contact us for an Alpharetta quote.
Alpharetta Market Context
Alpharetta's scrap is a construction and building-systems story more than a production one. Office tenant improvements, electrical and low-voltage cable pulls, HVAC replacements, and power upgrades at colocation and network sites all put copper, aluminum, and wire into dumpsters when nobody plans for them.
Volumes are project-sized rather than plant-sized, so capture depends on planning: a labeled container at the start of the job, clean segregation, and a weight record that ties settlement to the jobsite. Contractors who plan for it turn scrap into a credit against the job.
Alpharetta Scrap and Recycling Requirements
Georgia scrap metal requirements
Georgia's secondary metals recycler statute (O.C.G.A. 10-1-350 through 10-1-359.5) governs how scrap purchases are recorded and paid: transaction records, county sheriff registration, GBI database reporting, and limits on cash payment for regulated metal property. Where a sale falls under it, expect to provide identification and transaction details. Exemptions apply to some sellers and are checked per transaction. This is not legal advice.
Waste and transport rules for mixed loads
Building-system scrap can hide regulated parts. HVAC units and electrical equipment may carry refrigerant, oil, or batteries, so scoping includes a characterization check under RCRA (TCLP under EPA Method 1311 where a determination is needed) and the universal waste rule (40 CFR Part 273). Loads that include batteries move under DOT and PHMSA rules for UN3480 and UN3481, and residual material follows Georgia EPD solid waste rules and Chapter 391-3-11.
Local considerations in Alpharetta
The Georgia secondary metals recycler law applies in Fulton County and across North Fulton, with registration handled through the county sheriff. Confirm residual solid waste limits with the local office. Multi-tenant corridor buildings add dock hours, freight elevator reservations, and property manager rules that shape container placement and pickup timing.
Materials Accepted
The table below shows what's accepted and where it typically comes from.
Materials are confirmed at assessment and out-of-scope items are identified before pickup. Precious-metal-bearing material is scoped case by case.
Coverage Around Alpharetta
Alpharetta is roughly 30 to 35 miles from Blue Revive's Buford office. Scrap projects are scheduled around jobsite access, quantity, and project timeline.
Container size and pickup timing depend on how much material the job will produce. Sharing the build-out or upgrade schedule at scoping lets containers arrive when the material starts to come out.
Related pages: Electronics recycling in Alpharetta and IT decommissioning in Alpharetta. See also non-ferrous metal recycling across Georgia and the national overview.
Contact us to scope scrap recovery for an Alpharetta project.
Who We Serve
-
Electrical and low-voltage contractors clearing wire, cable, and switchgear
-
Mechanical and HVAC contractors replacing equipment
-
Property managers and building owners running tenant improvements
-
Colocation and network site operators upgrading power systems
-
Facility teams handling renovations and equipment changeouts
Grading, Weighing, and Settlement
Each load is classified by type, form, and cleanliness and weighed on receipt, and the result is compared with the assessment so differences are visible before settlement. Because value tracks published market indices and grade, terms are defined per project and no price is quoted up front. Records show grade, weight, and settlement basis and support your audit position without guaranteeing compliance. A certificate of recycling covers any electronic or battery-bearing material, with downstream handling documented.
How the Process Works
-
Assessment and grading. Review the plans or walk the site to identify materials, estimate quantity, and agree on how to segregate them.
-
Container placement. Where the job supports it, containers go out at the start and are labeled by metal so grades stay clean.
-
Scheduled pickup. Schedule pickup around the build-out or upgrade, building access, and hauling limits.
-
Weighing and verification. Each load is weighed on receipt and reconciled to the assessment, with variances noted before settlement.
-
Settlement and documentation. Settlement is issued on the index basis and grade, with the weight and grade records attached.
Frequently Asked Questions
What scrap comes from an office build-out?
Copper wire and cable, aluminum framing and fixtures, brass fittings, and electrical scrap from panels and switchgear are common. The list is confirmed at assessment. Contact us with photos or a description.
Is a small tenant project worth a container?
It can be, when the material is segregated and weighed. Volumes are smaller than plant scrap, so container size and pickup timing are scoped to the project. Contact us with your estimate.
How is settlement calculated?
Published market indices for the metal set the basis, and grade and weight adjust it. Terms are defined per project and no fixed rate is quoted in advance. Contact us to talk through the material your project will generate.
Does Georgia's scrap metal law affect my sale?
Georgia's secondary metals recycler law adds transaction records, sheriff registration, and GBI reporting, and limits cash payment for regulated metal property. Sellers should bring identification and transaction details, and some sellers are exempt. Contact us to confirm what applies to your sale.
Contact Blue Revive
Contact us
Office: 4540 Atwater CT, STE 107, Buford, GA 30518
Ready to scope your Alpharetta scrap project? Contact us.
